? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 11/03/16 lsp05g module series agency approvals applications additional information description features rohs ? maximum discharge cur rent (i max ) 10ka, 8/20s ? meets ansi c136.2 enhanced level 10kv/5ka, ieee c62.41.2 location category c low exposure and us dept. of energy msslc model spec. ? t hermally protected varistor technology ? parallel and series connected spd options ? ip66 water-proof and dust-proof ? ul1449 recognized (120vac, 240vac and 277vac only) ? series- connected option for 240v and 277v is iec 61643-1 1 test class ii and en 61643-1 1 t ype 2 compliant. ? outdoor and commercial led lighting ? r oadway lighting ? t raffc lighting ? digit al signage ? w all wash lighting ? iec cb scheme certifcate nl -37684 available for 240v and nl-40516 for 277v ? compact f orm factor with mounting tabs ? 240v ac and 277vac are ce compliant and available for class i and class ii installation based on iec luminaire protection classes ? series connected C v aristor thermal protection indication by removal of power to luminaire ? high line-to-earth/ ground resist ance ? r ohs compliant ? p arking garage lighting ? flood lighting ? t unnel lighting ? street lighting datasheet samples resources absolute maximum ratings ? for ratings of individual members of a series, see device ratings and specifcations chart caution: stresses above those listed in "absolute maximum ratings" may cause permanent damage to the device. this is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specifcation is not implied. lsp05g series units continous: max ac voltage range (v m(ac)rms ) 150 to 510 v continuous cur rent 5 a transient: maximum disc harge current, 8/20s waveform (i max ) 10,000 a nominal disc harge current, 8/20s waveform (i n ) 5,000 a operating ambient temperature range (t a ) -45 to +85 c storage temperature range (t stg ) -45 to +90 c isolation voltage capability (when the thermal disconnect opens) 600 v insulation resistance >1,000 m agency standard agency file number ul1449 for 120v, 240v, 277v only e320116 littelfuses lsp05g thermally protected surge protective device is a self-protected device specially designed to be used in outdoor and commercial led lighting fxtures for transient overvoltage protection. it has been developed with littelfuses thermally protected varistor technology. its built-in thermal disconnect function provides additional protection to prevent catastrophic failure and fre hazard even under extreme circumstances of varistor end-of-life or sustaining over voltage conditions. it also provides high line-to-earth/ ground resistance, facilitating faster production line testing. lsp05g series connected option allows clear indication of thermal fault protection by disconnecting power to luminaire, thereby signaling spd module replacement. the lsp05g surge protective device facilitates customers product compliance to ieee c62.41.2 location category c low ansi c136.2 and us dept. of energy msslc model spec. surge protection module led lighting surge protection module > lsp05g
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 11/03/16 * = s or p ? with 1500vac hi-pot withstand capability in common mode (l-g and n-g) glossary: 1. mcov/u c : maximum continuous operating voltage - maximum r.m.s. voltage that could be continuously applied to the spd. 2. maximum discharge current i max (a): the maximum discharge current is a measure of the spds maximum capability; single impulse of discharge current uses the 8/20s current waveform. 3. nominal discharge current i n (a): the nominal discharge current is a measure of the spds endurance capability; 15 impulses of discharge current uses the 8/20s current waveform. 4. mlv: ul1449 measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20s nominal discharge current (i n ); an average voltage value of 15 impulses 5. u p : iec 61643-11 voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20s nominal discharge current (i n ); a rounding voltage value of maximum measurement. 6. series module used in parallel connection for indication circuit connection. 7. lsp05g240s & LSP05G277s are certifed by dekra with below iec 61643-11 specifcations lsp05g series device ratings & specifcations part number operating voltage (vac) mcov/u c 1 (vac) maximum discharge current 2 i max (a) nominal discharge current 3 i n (a) typical m lv 4 (v) typical u p 5 (v) safety compliance iec/en 61643-11 6 & 7 ul1449 lsp05g120* 120 150 10,000 5,000 l-n:600 l-g:1410 n-g:1410 l-n:700 l-g:1600 n-g:1600 x lsp05g240* 240 275 10,000 5,000 l-n:970 l-g:1410 n-g:1410 l-n:1100 l-g:1600 n-g:1600 x x LSP05G277* 277 320 10,000 5,000 l-n: 1130 l-g: 1410 n-g:1410 l-n: 1200 l-g: 1600 n-g:1600 x x lsp05g347* 347 420 10,000 5,000 l-n: 1530 l-g: 1550 n-g: 1410 l-n: 1600 l-g: 1700 n-g: 1600 lsp05g480* 480 510 10,000 5,000 l-n: 1800 l-g: 1900 n-g: 1410 l-n: 2100 l-g: 2000 n-g: 1600 lsp05g480*h ? 480 510 10,000 5,000 l-n: 1800 l-g: 3090 n-g: 3090 l-n: 2100 l-g: 3700 n-g: 3700 lsp05g240s specifcation parameter value unit condition temporary overvoltage tov u t 337 v lv system fault 255 v x 1.32 at t t = 5 s, tn power grid temporary overvoltage tov u t 442 v lv system fault 255 v x 1.732 at t t = 120 min, tn power grid power grids tn backup fuse 16 a max., gg fuse end of life indication yes optical, light on: spd is functional light off: spd has reached end-of-life max earth leakage current at uc 50 a max. rms, to gnd LSP05G277s specifcation parameter value unit condition temporary overvoltage tov u t 403 v lv system fault 305 v x 1.32 at t t = 5 s, tn power grid temporary overvoltage tov u t 529 v lv system fault 305 v x 1.732 at t t = 120 min, tn power grid power grids tn backup fuse 20 a max., gg fuse end of life indication yes optical, light on: spd is functional light off: spd has reached end-of-life surge protection module led lighting surge protection module > lsp05g
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 11/03/16 dimensions series version parallel version notes: 1. black: line; white: neutral; green: ground. (p/n with suffx x3333/x3316: brown: line; blue: neutral; green-yellow stripe: ground) 2. wire gauge: awg16, wire length: 100mm20mm, wire stripping length:102mm. 3. caution: line/neutral wires must be correctly connected to ac power grid. wiring error on line/neutral polarity may cause module failure. repetitive surge capability 10 4 10 5 10 6 10 3 10 2 2 1 15 10 100 1,000 10,000 impulse dura tion ( s) 100,000 10,000 100 10 1 surge current (a) model size = 20mm 130 to 625v m(ac) rating t a = -55 o c t o 85 o c 1,000 pulse rating (8x20sec) strikes surge 1 10,000a 2 7,000a 15 5,000a 100 1,500a 1,000 700a surge protection module led lighting surge protection module > lsp05g
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 11/03/16 part numbering system lsp 05g 120 p n h xxxxx littelfuse surge protection module 5ka (nominal discharge current) operating voltage p: parallel connection s: series connection blank: waterproof ip66 n: non-waterproof blank: no hi-pot withstand capability in common mode h: with 1500vac hi-pot withstand capability in common mode (l-g and n-g) x3316: without gnd wire connection, available for 240vac and 277vac rating with ce marking for class ii unearthed luminaire installation wire color: line: brown, neutral: blue x3379: input wire length: 110mm +/-10mm, output wire length: 210mm+/-10mm product is ce marked for class i earthed luminaire installation and class ii unearthed luminaire installation (if earth connection is not utilized). other options: x3333: with gnd wire connection, avail- able for 240vac and 277vac rating with ce marking for class i earthed luminaire installation wire color: line: brown, neutral: blue, ground/p: green with yellow stripe application/installation schematic l n g sp d l l n /g o r a c/d c p owe r suppl y le d m odul e l n + - p a r a lle l conne c t i on l n g sp d l l n /g o r le d m odul e l n + - le d n o rmally o n p a r a lle l conne c t i on wit h le d indic a t in g sp d s t a t u s - on (green): sp d is o n lin e - off: sp d n eed s r e p la c e m e n t lsp10xxxs lsp10xxxs a c/d c p owe r suppl y r l n g sp d le d m odul e l n + - p a r a lle l conne c t i on (for class ii unearthed) a c/d c p owe r suppl y ~x3316 l n g sp d le d m odul e l n + - series conne c t i on (for class ii unearthed) ~x3316 a c/d c p owe r suppl y l n g sp d sp d l l n /g o r le d m odul e l n + - series conne c t i on notes: 1. series module used in parallel connection for indication circuit connection. 2. led indicator and associated circuitry are not included in the module. 3. black wire is ac line voltage (hot); white wire is ac neutral voltage. 4. black wire voltage is cut off when spd needs replacement. 5. r is current limiting resistor; it resistance/wattage is determined by ac line voltage and desired current driving led. example: ac line voltage 240v, led: 1.6ma, resistor:150kohm/0.5w. lsp05gxxxs lsp05gxxxp l n g sp d l l n /g o r a c/d c p owe r suppl y le d m odul e l n + - p a r a lle l conne c t i on l n g sp d l l n /g o r le d m odul e l n + - le d n o rmally o n p a r a lle l conne c t i on wit h le d indic a t in g sp d s t a t u s - on (green): sp d is o n lin e - off: sp d n eed s r e p la c e m e n t lsp10xxxs lsp10xxxs a c/d c p owe r suppl y r l n g sp d le d m odul e l n + - p a r a lle l conne c t i on (for class ii unearthed) a c/d c p owe r suppl y ~x3316 l n g sp d le d m odul e l n + - series conne c t i on (for class ii unearthed) ~x3316 a c/d c p owe r suppl y l n g sp d sp d l l n /g o r le d m odul e l n + - series conne c t i on ac/dc power supply lsp05gxxxs surge protection module led lighting surge protection module > lsp05g
|
